Selective Pallet Rack
The most universal pallet racking system for direct access to every pallet position.
Tempe, Arizona
Pallet Racks & Warehouse Racking in Tempe, AZ
Pallet racking sized for Tempe's older infill buildings and tight industrial footprints.
Tempe warehouses are usually smaller than what the operation inside them has grown into. Land near Sky Harbor and along the Loop 202 is spoken for, so most Tempe tenants are working with infill buildings that were built decades ago and cannot simply be extended. That makes vertical space the only space left. We measure what your building can genuinely carry, then design pallet racking that pulls product off the floor and gives every pallet an address. In a lot of Tempe facilities that alone doubles the positions available without touching the lease.
Why Tempe Warehouses Work With Us
Tempe's industrial building stock is largely older infill product with modest clear height, tighter column spacing and loading that was designed for a different era of material handling. A layout copied from a modern big-box shell simply will not fit.
Around the Tempe Airpark and the Priest and Broadway industrial pockets we routinely rack buildings where every inch of aisle matters. Getting the aisle width right for your specific forklift is often worth an entire extra row.
Proximity helps. Our Phoenix location is minutes from most Tempe addresses, so coordinating an installation or getting a replacement beam out does not turn into a multi-week freight exercise.
Free CAD layout with a real pallet position count
Itemized quote — every beam, frame, deck and anchor listed
Rack type matched to how your inventory actually moves
Anchored, plumbed, labeled and capacity-tagged on install
One local point of contact for parts and expansion
Industries We Serve in Tempe
- E-commerce fulfillment
- Beverage and food service
- Technology hardware
- Wholesale distribution
Serving warehouses across Tempe Airpark, Priest Drive corridor, Broadway industrial, South Tempe flex and the rest of the area around the Loop 202 Red Mountain and I-10 corridors.
What a Tempe Pallet Rack Project Includes
We begin with the constraints, because in Tempe the constraints drive the design. Column spacing, clear height under sprinklers, dock positions, and the turning radius of your existing forklift all shape what is possible.
Our design team produces a CAD layout of your Tempe warehouse showing aisle widths, row placement, beam elevations and a pallet position count, with an itemized quote listing every component in the system.
Rack type gets matched to the building as much as the inventory. In lower-clear buildings we often add beam levels and narrow the aisles slightly; in deeper buildings push back bays recover the space that cross aisles would otherwise consume.
Installation is scheduled in phases so your operation keeps shipping. Installation partners anchor and plumb each frame, install decking, then label and capacity-tag the system. Afterward you keep the same local contact for parts, added levels and reconfiguration.
1
Free Design Consultation
We start with a conversation about your Tempe warehouse — pallet sizes, loaded weights, forklift type, clear height, and how the operation runs day to day.
2
CAD Layout & Quote
Our design team produces a CAD layout showing beam elevations, aisle widths and the exact pallet position count your building supports, with an itemized quote.
3
Right Rack For The Job
Selective, push back, drive-in, pallet flow, carton flow or cantilever — we recommend the system that fits how you move product, not a one-size-fits-all spec.
4
Phased Installation
You approve the layout, we order the steel, and coordinate installation anchored, plumbed, labeled and capacity-tagged — phased so your Tempe operation keeps receiving.
Pallet Rack Systems We Install in Tempe
A complete line of industrial pallet racks and warehouse racking sized for how Tempe operators run their buildings.
Push Back Pallet Rack
High-density storage where pallets are loaded from a single aisle.
Drive-In Pallet Rack
High-density storage for large quantities of similar products.
Pallet Flow Rack
First-in, first-out (FIFO) system with gravity-fed lanes.
Cantilever Rack
Open-front design for long, bulky, or irregularly shaped items.
Carton Flow Rack
Hand-picking system with gravity-fed wheel conveyors.
Get a Free Tempe Pallet Rack Quote
Tell us about your warehouse — clear height, pallet sizes, weight and forklift type — and we'll come back with a detailed quote and a free CAD layout.
What you get back:
- Free CAD layout with pallet position count
- Itemized project quote
- A rack recommendation that fits your operation
- A realistic installation timeline
Monday - Saturday: 7:00 AM - 7:00 PM
Planning Your Project
Common Warehouse Design Questions
Before designing your pallet rack system, there are several key factors to consider. Our warehouse design specialists will help you answer these questions during your free consultation.
Free Design Consultation Includes:
- Warehouse needs analysis
- Detailed CAD layout drawings
- Pallet rack system recommendations
- Complete project quote
Pallet Rack FAQs for Tempe
Straight answers to the questions we get asked most before a project starts.
Pallet Racks Near Tempe
Phoenix Pallet Rack installs industrial pallet racks across Tempe, including Tempe Airpark, Priest Drive corridor, Broadway industrial, South Tempe flex and the industrial areas around the Loop 202 Red Mountain and I-10 corridors. From there we cover the rest of the region, so multi-site operators can standardize warehouse racking across every building.
Ready to Start Your Tempe Warehouse Project?
Free quote, free CAD layout, and local Arizona support from a team that already knows these buildings.